Pass4Test is a website to provide IT certification exam training tool for people who attend IT certification exam examinee. Pass4Test's training tool has strong pertinence, which can help you save a lot of valuable time and energy to pass IT certification exam. Our exercises and answers and are very close true examination questions. IN a short time of using Pass4Test's simulation test, you can 100% pass the exam. So spending a small amount of time and money in exchange for such a good result is worthful. Please add Pass4Test's training tool in your shopping cart now.
If you buy Pass4Test's Avaya certification 3605 exam practice questions and answers, you can not only pass Avaya certification 3605 exam, but also enjoy a year of free update service. If you fail your exam, Pass4Test will full refund to you. You can free download part of practice questions and answers about Avaya certification 3605 exam as a try to test the reliability of Pass4Test's products.
Exam Code: 3605
Exam Name: Avaya (Avaya Ethernet Routing Switch Implementation and Maintenance Exam)
One year free update, No help, Full refund!
Total Q&A: 173 Questions and Answers
Last Update: 2013-10-09
To choose our Pass4Test to is to choose success! Pass4Test provide you Avaya certification 3605 exam practice questions and answers, which enable you to pass the exam successfully. Simulation tests before the formal Avaya certification 3605 examination are necessary, and also very effective. If you choose Pass4Test, you can 100% pass the exam.
The person who has been able to succeed is because that he believed he can do it. Pass4Test is able to help each IT person, because it has the capability. Pass4Test Avaya 3605 exam training materials can help you to pass the exam. Any restrictions start from your own heart, if you want to pass the Avaya 3605 examination, you will choose the Pass4Test.
3605 Free Demo Download: http://www.pass4test.com/3605.html
NO.1 In a multicast campus, when should an ERS 8600 PIM interface be configured to run in passive
mode?
A. When the interface is used as an edge interface and is aggregating traffic.
B. When the interface is used as a core interface and needs to limit PIM messages to reduce the
system load.
C. When there are no unicast routing paths.
D. When more than one unicast routing protocol is in use.
Answer: A
Avaya 3605 braindump 3605 test answers 3605 dumps 3605 certification 3605 exam dumps
NO.2 The attempt to manage an Ethernet Routing Switch (ERS) 8000 using a Virtual Route
Redundancy Protocol (VRRP) address was not successful. What is causing this problem?
A. The virtual router identifier is 0.
B. The data center interface is set as a critical IP interface.
C. A real IP address is required for management access not a VRRP address.
D. The virtual router identifier is configured for the VRRP IP address owner.
Answer: C
Avaya 3605 3605 dumps torrent 3605 test answers 3605 original questions
NO.3 What does the trace level 9 3 command accomplish?
A. It captures BGP events at a terse level.
B. It captures packets copied to the CPU at a verbose level.
C. It shows CPU utilization.
D. It captures RCC IP events at verbose level.
Answer: B
Avaya 3605 3605 study guide 3605
NO.4 By default the ERS 8000 is configured for warm standby. After installation of a new ERS
solution with dual CPUs, which three actions need to be Perform on the ERS configuration to ensure
high availability mode is enabled and will function correctly? (Choose three)
A. Set the high availability CPU boot flag to true.
B. Set the warm standby CPU hoot flag to false. C. Set the save to standby CPU boot flag to true.
D. Save the boot.cfg conflg file and reset the switch to activate the changes.
E. Install the high availability license file.
Answer: A,D,E
Avaya dumps 3605 3605 3605 dumps 3605 braindump
NO.5 The Ethernet Routing Switch (ERS) 8600 switch includes a means to fine tune the memory
resources by allowing the record allocations to be allowed. An ERS 8600 running Release 5.0 needs
to be configured to be optimized for multicast traffic. Which command alters the ERS 8600 to
increases the default allocation of Multicast by 50 percent?
A. Config sys set record record reserve MGID + 50
B. Config sys set max-vlan-resource-reservation 4096
C. Config sys set show sys mgid usage
D. Config sys set multicast-resource-reservation 3073
Answer: D
Avaya 3605 demo 3605 answers real questions 3605 3605 study guide 3605
NO.6 What does Ping snoop identify?
A. The path that IP traffic takes over an MLT or SMLT
B. The rate of IP traffic flow
C. Which port filter is best to use on MLT networks
D. Rate limiting for ICMP traffic
Answer: A
Avaya 3605 3605 3605
NO.7 Traceroute allows a route to be traced to a network using an Ethernet Routing Switch (ERS)
8600 CLI command. How could you use it to limit the number of hops the traceroute reports?
A. Configure the -P (base UDP port) to the number of maximum number hops.
B. Configure the -q (number of probes per TTL) to the number maximum number of hops.
C. Configure the -m (maximum TTL value) to the number of maximum number of hops.
D. Configure the -w (wait time per probe) to the number of maximum number of hops.
Answer: C
Avaya 3605 3605 dumps torrent 3605 certification
NO.8 When configuring a new Ethernet Routing Switch (ERS) 8000 using the default interface, the
attempt to load an ACLI configuration fails because the default interface is the CLI. How is the ACLI
interface obtained?
A. Change the interface type in the config.cfg file.
B. Change the ACLI boot flag and save the boot configuration file.
C. Exit the CLI and choose ACLI at the interface manager prompt.
D. Use the abort command and enter 'no' at the default interface.
Answer: C
Avaya 3605 3605 3605
NO.9 The SNMP counters check for authorization failures and other types error conditions. Which of
these SNMP error conditions is displayed in Enterprise Device Manager?
A. PCAP packet capture counters
B. In Bad Community Names counters
C. Fan Failure packet counters
D. Power Supply Failure packet counters
Answer: D
Avaya 3605 3605
NO.10 A campus network requirement is to introduce Virtual Routing and Forwarding (VRF) in the
existing Ethernet Routing Switch (ERS) 8600-based core. The technician has to configure VRF on the
ERS 8600. Which statement represents the order for configuring a new VRF?
A. Creating a new VLAN, add an IP address to the VLAN, create the VRF in the VLAN configuration.
B. Create VRF, change context to the new VRF, add an IP address, create a new VLAN, and move the
VLAN to the new VRF.
C. Create a VRF, change context to the new VRF, create a new VLAN, add an IP address to the VLAN.
D. Create a VRF, create a new VLAN, move the VLAN to the new VRF, change context to the new VRF,
and add an IP Address.
Answer: D
Avaya 3605 3605 practice test 3605
Pass4Test offer the latest FCNSP.v5 exam material and high-quality DC0-260 pdf questions & answers. Our 100-101 VCE testing engine and 700-104 study guide can help you pass the real exam. High-quality VCP5-DCV dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.
Article Link: http://www.pass4test.com/3605.html
没有评论:
发表评论