HP HP0-Y43 exam brain dumps

If you want to take HP HP0-Y43 exam, Pass4Test HP HP0-Y43 exam dumps are your best tools. The dumps can help you pass HP0-Y43 test easily. And the dumps are very highly regarded. With our test questions and test answers, you don't need to worry about HP0-Y43 certification. Because our dumps can solve all difficult problems you encounter in the process of preparing for the exam. Before you make a decision, you can download our free demo. For this, you will know whether our questions and answers fit to you or not.

Pass4Test website is fully equipped with resources and the questions of HP HP0-Y43 exam, it also includes the HP HP0-Y43 exam practice test. Which can help candidates prepare for the exam and pass the exam. You can download the part of the trial exam questions and answers as a try. Pass4Test provide true and comprehensive exam questions and answers. With our exclusive online HP HP0-Y43 exam training materials, you'll easily through HP HP0-Y43 exam. Our site ensure 100% pass rate.

Exam Code: HP0-Y43
Exam Name: HP (Implementing HP Network Infrastructure Solutions Exam)
One year free update, No help, Full refund!
Total Q&A: 62 Questions and Answers
Last Update: 2013-12-27

Pass4Test is a convenient website to provide training resources for IT professionals to participate in the certification exam. Pass4Test have different training methods and training courses for different candidates. With these Pass4Test's targeted training, the candidates can pass the exam much easier. A lot of people who participate in the IT professional certification exam was to use Pass4Test's practice questions and answers to pass the exam, so Pass4Test got a high reputation in the IT industry.

You can free download part of Pass4Test's practice questions and answers about HP certification HP0-Y43 exam online, as an attempt to test our quality. As long as you choose to purchase Pass4Test's products, we will do our best to help you pass HP certification HP0-Y43 exam disposably.

HP0-Y43 Free Demo Download: http://www.pass4test.com/HP0-Y43.html

NO.1 A company has a service level agreement (SLA) with its service provider. The SLA specifies a 2 Mbps
committed information rate (CIR) and 20 KB committed burst size (CBS). Lately, during peak usage times,
the company has been experiencing brief periods of poor performance on its external connection
(GigabitEthernet port 2/0/1 on an HP 5800 switch).
How can the network administrator configure the Comware switch to address this problem?
A. Configure a traffic classifier that selects all traffic and a car traffic behavior that sets the CIR to 2 Mbps
and the CBS to 20 KB. Create a QoS policy that maps the classifier to the action and apply this policy as
an inbound policy on port GigabitEthernet 2/0/1.
B. Enable Strict Priority (SP) scheduling on port GigabitEthernet 2/0/1 and ensure that all inbound traffic is
marked with the correct priority.
C. Configure generic traffic shaping (GTS) on the GigabitEthernet port 2/0/1, setting the CIR to 2 Mbps
and the CBS to 20 KB.
D. Configure a traffic classifier that selects all traffic and a car traffic behavior that sets the CIR to 2 Mbps
and the CBS to 20 KB. Create a OoS policy that maps the classifier to the action and apply this policy as
an outbound policy on port GigabitEthernet 2/0/1.
Answer: C

HP certification   HP0-Y43   HP0-Y43 certification   HP0-Y43   HP0-Y43 exam simulations

NO.2 How can a high density of ports and high throughput at the core of an HP FlexNetwork save customers
money?
A. Intelligence is offloaded from the edge switches, enabling customers to save money on the most
numerous switches in their solutions.
B. The customer can combine the data center and campus LAN core into a single entity, reducing power
and cooling costs.
C. The customer no longer needs to deploy modular switches at the distribution level and the edge,
deploying more cost-effective stackable switches instead.
D. The architecture can be simplified, eliminating expensive distribution devices and reducing power and
cooling costs.
Answer: D

HP   HP0-Y43   HP0-Y43   HP0-Y43

NO.3 A company has a network that includes HP 5800 and 12500 switches. Usage demands on the
company's FTP servers have increased, causing performance issues during peak usage times. While
analyzing link utilization, the network administrator noticed that the most heavily utilized links experience
bursts of congestion, causing them to drop traffic. The links then experience brief periods of low utilization
followed by another burst of congestion. This pattern continues periodically throughout the peak utilization
time.
What should the network administrator do to attempt to create a more efficient traffic pattern on these
links?
A. Configure an outbound traffic policing policy on the ports in question, setting the CIR at about sixty
percent of the ports' capacity and the PIR at about eighty percent.
B. Apply Weighted Fair Queuing (WFQ) or Weighted Round Robin (WRR) scheduling in preference to
Strict Priority (SP) scheduling on the ports in question.
C. Configure inbound traffic policing policies on ports at the core, setting the CIR at about sixty percent of
the ports' capacity and the PIR at about eighty percent. Apply outbound generic traffic shaping (GTS) on
ports facing the core ports, setting the CIR equal to the CIR on the core ports.
D. Apply a WRED table to the ports in question, optionally adjusting the table values to drop lower priority
traffic first.
Answer: D

HP   HP0-Y43   HP0-Y43 exam dumps   HP0-Y43 study guide

NO.4 A network includes a mix of IGMPv2 and IGMPv3 endpoints and must support the following source
specific multicasting applications:
-Source: 10.1.4.2 and Group: 232.0.5.5
-Source: 10.1.4.12 and Group 232.0.6.6
The network is already implementing PIM-SM and IGMPv3. In order to support these applications, the HP
10500 switches that act as routers for the endpoints in question must support another feature. Which step
must the network administrator perform on each of these switches?
A. Create an SSM policy that includes 232.0.5.5 and 232.0.6.6 within its range
B. Enable IGMPv2 backward compatibility mode
C. Configure two SSM maps, each of which mapsa source to its multicast group
D. Enable PIM SSM on the interfaces that connect to the endpoints
Answer: C

HP exam dumps   HP0-Y43 questions   HP0-Y43

NO.5 Which switch is best suited to act at the edge of a medium to large HP FlexFabric solution?
A. 10500
B. 5500
C. 9500
D. 5830
Answer: D

HP test answers   HP0-Y43 certification training   HP0-Y43 certification   HP0-Y43   HP0-Y43 braindump

NO.6 View the exhibit.
The exhibit shows a network with HP 5400 zl and 8200 zl switches throughout the core and edge. What is
one advantage of implementing routing on edge switches?
A. Typically, it is easier to implement user-based VLAN assignments.
B. The topology has higher redundancy because edge switches can take over routing roles when
necessary.
C. Typically, the network can use fewer total VLANs when edge switches implement routing.
D. Typically, it is easier to ensure that routed links between edge and core switches are fully utilized.
Answer: D

HP   HP0-Y43   HP0-Y43   HP0-Y43   HP0-Y43

NO.7 View the exhibit.
A network administrator wants to configure an HP 5800 switch to place all incoming traffic on the
GigabitEthernet 1/0/1 port in priority queue 3. However, one exception applies. All traffic incoming on that
port that is destined to UDP port 55555 should be forwarded in priority queue 4 and marked with DSCP
32.
Based on the current configurations shown in the exhibit, which further steps must the network
administrator perform? (Select two.)
A. Configure port GigabitEthernet 1>0/1 to trust DSCP
B. Apply QoS policy Policy1 as on inbound policyon port GigabitEthernet 1/0/l
C. Apply QoS policy Policy2 as on inbound policyon port GigabitEthernet 1/0/1
D. Create a OoS Ip-dscp mapthat maps Ip value 4 to DSCP02
E. Undo OoS trust on port GigabitEthernet 1/0/1
Answer: B,E

HP   HP0-Y43   HP0-Y43 certification   HP0-Y43 demo

NO.8 View the exhibits.
Exhibit 1
The frame has these characteristics:
-VLANID = 3
-802.1p = 3
-DSCP=32
-Source IP address = 10.1.1.5
Click here for Exhibit 2
The frame shown in Exhibit 1 arrives on an HP 5800 switch's GigabitEthernet port 1/0/1. QoS maps are at
their default settings. Based on the configuration shown in Exhibit 2, to which queue is the outbound
packet assigned?
A. 2
B. 3
C. 4
D. 5
Answer: D

HP certification   HP0-Y43   HP0-Y43   HP0-Y43   HP0-Y43

NO.9 What is the role of neighbor solicitation (NS) messages in the autoconfiguration of an IPv6 address.?
A. An IPv6 node sends an NS message to inform a node undergoing autoconfiguration that it is already
using a particular address.
B. An IPv6 node sends an NS message for its tentative address to determine whether another node is
using it.
C. An IPv6 node sends an NS message for the global prefix to prompt other IPv6 nodes to advertise the
addresses that they are using on that prefix.
D. An IPv6 node sends an NS message to prompt an IPv6 router on the link to advertise the global
prefixes associated with the link immediately.
Answer: B

HP braindump   HP0-Y43   HP0-Y43   HP0-Y43   HP0-Y43

NO.10 A customer requires an HP FlexCampus solution with a core that scales to 40/100G. Which HP switch
fabric meets this need?
A. the 7500's CLOS switch fabric
B. the 10500's CLOS switch fabric
C. the 7500's crossbar switch fabric
D. the 10500's crossbar switch fabric
Answer: B

HP   HP0-Y43 exam   HP0-Y43   HP0-Y43 dumps torrent   HP0-Y43   HP0-Y43

Pass4Test offer the latest 000-455 exam material and high-quality HP0-J65 pdf questions & answers. Our 000-350 VCE testing engine and VCAP5-DCD study guide can help you pass the real exam. High-quality HP2-E59 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.pass4test.com/HP0-Y43.html