Citrix 1Y0-350 study guide

If you find any quality problems of our 1Y0-350 or you do not pass the exam, we will unconditionally full refund. Pass4Test is professional site that providing Citrix 1Y0-350 questions and answers , it covers almost the 1Y0-350 full knowledge points.

Pass4Test will provide exam prep and Citrix 1Y0-350 exam simulations you will need to take a certification examination. About Citrix 1Y0-350 test, you can find related dumps from different websites or books, however, Pass4Test has the advantage of perfect contents, strong logicality and complete supporting facilities. Pass4test original questions and test answers can not only help you to pass an exam, can also save you valuable time.

Exam Code: 1Y0-350
Exam Name: Citrix (Citrix NetScaler 10 Essentials and Networking)
One year free update, No help, Full refund!
Total Q&A: 126 Questions and Answers
Last Update: 2014-02-04

Pass4Test is a website to provide a targeted training for Citrix certification 1Y0-350 exam. Pass4Test is also a website which can not only make your expertise to get promoted, but also help you pass Citrix certification 1Y0-350 exam for just one time. The training materials of Pass4Test are developed by many IT experts' continuously using their experience and knowledge to study, and the quality is very good and have very high accuracy. Once you select our Pass4Test, we can not only help you pass Citrix certification 1Y0-350 exam and consolidate their IT expertise, but also have a one-year free after-sale Update Service.

According to the candidate's demand, Pass4Test will update Citrix 1Y0-350 dumps. Pass4Test is a composite of top IT experts, certified trainers and competent authors for Citrix 1Y0-350 exam. They collate the braindumps, guarantee the quality! No matter how the times change，Pass4Test good quality will never change. After the majority of candidates purchase our products, they passed Citrix 1Y0-350 certification exam, which indicates Pass4Test has high quality.

1Y0-350 Free Demo Download: http://www.pass4test.com/1Y0-350.html

NO.1 A network engineer has configured two NetScaler MPX appliances as a high availability (HA)
pair.
What can the engineer configure to prevent failover if only a single interface fails?
A. FIS
B. PBR
C. SNMP
D. VMAC
Answer: A

Citrix certification   1Y0-350   1Y0-350   1Y0-350 exam simulations   1Y0-350 certification training

NO.2 A network engineer wants to optimize a published load balanced SSL virtual server for WAN
connection with long delay, high bandwidth with minimal packet drops.
What would the network engineer use to do this type of optimization for the SSL virtual server?
A. SSL policy
B. TCP profile
C. Compression policy
D. Priority queuing policy
Answer: B

Citrix   1Y0-350   1Y0-350

NO.3 Why would an engineer want to specify a TCP Profile for a specific service group?
A. To enable use of features like SSL over TCP for that specific service group.
B. To adjust the TCP settings for traffic to and from that specific service group.
C. To use a specific SNIP for traffic to the back-end servers in that service group.
D. To enable features like use source IP , TCP keep alive and TCP buffering for a specific service group.
Answer: B

Citrix   1Y0-350   1Y0-350   1Y0-350 demo   1Y0-350

NO.4 Scenario: For security reasons, the NSIP needs to be configured to only be accessible on
interface 0/1, which is VLAN 300.
The NSIP address is 10.110.4.254 and the subnet mask is 255.255.255.0.
How would the network engineer achieve this configuration?
A. set ns config -nsvlan 300 -ifnum 0/1
B. set ns ip 10.110.4.254 -gui ENABLED -vrID 300
C. add vlan 300 set ns ip 10.110.4.254 -mgmtAccess ENABLED
D. set ns config -IPAddress 10.110.4.254 -netmask 255.255.255.0
Answer: A

Citrix exam   1Y0-350   1Y0-350 braindump   1Y0-350 exam simulations   1Y0-350 answers real questions

NO.5 Scenario: A network engineer created an IPv6 virtual server on the NetScaler. The virtual
server is using a service group with two IPv4 servers bound to it. When testing access to the virtual
server from a client configured with an IPv6 address, he is unable to connect.
What could be the reason for this issue?
A. The NetScaler is disabled for NAT.
B. IPv6 protocol translation is disabled.
C. An IPv6 address on the NetScaler is not bound to the correct VLAN.
D. The NetScaler does not have an INAT rule to convert IPv4 to IPv6 from the back-end servers.
Answer: B

Citrix dumps   1Y0-350 original questions   1Y0-350 exam   1Y0-350   1Y0-350 test questions

NO.6 Scenario: An engineer executes the following commands:
add vlan 2 bind vlan 2 -ifnum 1 / 2 add ns ip 10.110.4.200 255.255.255.0 bind vlan 2 -IPAddress
10.110.4.200 255.255.255.0
What type of IP address has been added to the NetScaler?
A. VIP address
B. NSIP address
C. SNIP address
D. GSLB Site IP address
Answer: C

Citrix pdf   1Y0-350 demo   1Y0-350   1Y0-350 answers real questions   1Y0-350

NO.7 Scenario: A NetScaler appliance currently has a manually configured channel containing four
interfaces; however, the engineer has been told that the NetScaler must now only use a single
interface for this network. The engineer removes the channel and immediately notices a decrease in
network performance.
How could the engineer resolve this issue?
A. Reset the unused interfaces
B. Disable the unused interfaces
C. Enable flow control on all interfaces
D. Disable HA monitoring on the three interfaces that are no longer required
Answer: B

Citrix answers real questions   1Y0-350 exam prep   1Y0-350

NO.8 Scenario: The NetScaler is connected to two subnets. The NSIP is 10.2.9.12. The external SNIP
is 10.2.7.3. The MIP for internal access is 10.2.9.3. Web servers, authentication servers and time
servers are on the 10.2.10.0/ 24 network which is available through the
10.2.9.1 router. The external firewall has the 10.2.7.1 address. Traffic bound for Internet clients
should flow through the external firewall.
Which command should be used to set the default route?
A. add route 0.0.0.0 0.0.0.0 10.2.7.1
B. add route 0.0.0.0 0.0.0.0 10.2.9.1
C. add route 10.0.0.0 255.0.0.0 10.2.9.1
D. add route 10.0.0.0 255.0.0.0 10.2.7.1
Answer: A

Citrix   1Y0-350 exam   1Y0-350 certification   1Y0-350 answers real questions

NO.9 Scenario: A NetScaler engineer needs to enable access to some web servers running on an
IPv6-only network. The clients connecting the services are on an IPv4 network. The engineer has
already enabled IPv6 on the NetScaler.
What does the engineer need to do in order to provide access to the services on the IPv6 network?
A. Create an IPv6 tunnel and a IPv4 virtual server.
B. Configure an IPv6 VLAN and bind the required interface.
C. Create a IPv4 virtual server and bind the service group to it.
D. Create an IPv6 ACL and a IPv4 virtual server and bind the ACL to the virtual server.
Answer: C

Citrix   1Y0-350   1Y0-350

NO.10 Scenario: The NetScaler has connections to a large number of VPNs. The network engineer
wants to minimize the number of ARP requests.
Which feature should the network engineer enable to minimize ARP requests?
A. TCP Buffering
B. Use Source IP
C. Edge Configuration
D. MAC based forwarding
Answer: D

Citrix exam   1Y0-350   1Y0-350 test answers   1Y0-350 practice test

Pass4Test offer the latest HP0-S33 exam material and high-quality HP2-N40 pdf questions & answers. Our 000-275 VCE testing engine and 00M-503 study guide can help you pass the real exam. High-quality 70-492 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.pass4test.com/1Y0-350.html