Extreme Networks certification EW0-300 exam questions and answers come out

Dear candidates, have you thought to participate in any Extreme Networks EW0-300 exam training courses? In fact, you can take steps to pass the certification. Pass4Test Extreme Networks EW0-300 exam training materials bear with a large number of the exam questions you need, which is a good choice. The training materials can help you pass the certification.

Now it is a society of abundant capable people, and there are still a lot of industry is lack of talent, such as the IT industry is quite lack of technical talents. Extreme Networks certification EW0-300 exam is one of testing IT technology certification exams. Pass4Test is a website which provide you a training about Extreme Networks certification EW0-300 exam related technical knowledge.

Pass4Test's products can not only help customers 100% pass their first time to attend Extreme Networks certification EW0-300 exam, but also provide a one-year of free online update service for them, which will delivery the latest exam materials to customers at the first time to let them know the latest certification exam information. So Pass4Test is a very good website which not only provide good quality products, but also a good after-sales service.

Extreme Networks EW0-300 exam certification is widely recognized IT certifications. People around the world prefer EW0-300 exam certification to make their careers more strengthened and successful. Speaking of Extreme Networks EW0-300 exam, Pass4Test Extreme Networks EW0-300 exam training materials have been ahead of other sites. Because Pass4Test has a strong IT elite team, they always follow the latest Extreme Networks EW0-300 exam training materials, with their professional mind to focus on Extreme Networks EW0-300 exam training materials.

Through continuous development and growth of the IT industry in the past few years, EW0-300 exam has become a milestone in the Extreme Networks exam, it can help you to become a IT professional. There are hundreds of online resources to provide the Extreme Networks EW0-300 questions. Why do most people to choose Pass4Test? Because Pass4Test has a huge IT elite team, In order to ensure you accessibility through the Extreme Networks EW0-300 certification exam， they focus on the study of Extreme Networks EW0-300 exam. Pass4Test ensure that the first time you try to obtain certification of Extreme Networks EW0-300 exam. Pass4Test will stand with you, with you through thick and thin.

Exam Code: EW0-300

Exam Name: Extreme Networks (Extreme Networks Specialist....)

EW0-300 Free Demo Download: http://www.pass4test.com/EW0-300.html

NO.1 The majority of Extreme Networks switches have a dedicated out of band
management port and VLAN. The 10/100BASE-TX Ethernet management port
allows you to communicate directly to the CPU of the switch. If you want the switch
to forward traffic from the mgmt VLAN to other VLANS you just have to enable
ipforwarding on all VLANS including the management VLAN.
A. TRUE
B. FALSE
Answer: B

Extreme Networks   EW0-300   EW0-300   EW0-300 exam prep   EW0-300

NO.2 The following modes of operation are supported with the Network login feature.
(choose all that apply)
A. Secure mode
B. Campus mode
C. Quick Mode
D. ISP mode
Answer: A,B,C,D

Extreme Networks   EW0-300 study guide   EW0-300

NO.3 The following CLI command is valid to advertise SLB virtual servers in OSPF ith a
cost of 10.
Enable ospf export vip cost 10
A. True
B. False
Answer: A

Extreme Networks   EW0-300   EW0-300   EW0-300

NO.4 The maximum number of EAPS domains supported per switch and ring is?
A. 64
B. 32
C. 16
D. 8
Answer: A

Extreme Networks   EW0-300 pdf   EW0-300   EW0-300 original questions

NO.5 Which of the following statements fit the description of PIM sparse mode? (choose
three that apply)
A. PIM sparse mode is suitable for network with minimal multicast deployment.
B. PIM sparse mode builds shared trees based on a common Rendez-Vous Point
C. In PIM sparse mode the RPF check depends on the tree type
D. An explicit join is not required in PIM sparse mode.
Answer: A,B,C,D

Extreme Networks   EW0-300   EW0-300 dumps

NO.6 Exhibit:
According to accompanying diagram and ACL configuration it is possible for Host
A (10.10.10.100) and Host C (30.30.30.100) to successfully communicate.
A. TRUE
B. FALSE
Answer: A

Extreme Networks exam simulations   EW0-300 exam simulations   EW0-300 certification   EW0-300 exam prep

NO.7 Extreme ware 7.0 supports both level1 and level 2 IS-IS routers.
A. TRUE
B. FALSE
Answer: A

Extreme Networks test answers   EW0-300   EW0-300   EW0-300 questions   EW0-300 test answers   EW0-300

NO.8 In SLB, Port Translation Mode is similar to Translation Mode,except that in Port
Translation Mode the physical Port where the node connects to must be configured
as a Fast Ethernet Half Duplex port.
A. True
B. False
Answer: B

Extreme Networks test questions   EW0-300 test questions   EW0-300   EW0-300   EW0-300 study guide

NO.9 Extreme Ware 7.0 can support which OSPF authentication on a per VLAN basis:
A. MD5
B. Simple-password
C. Encrypted simple-password
D. All of these
Answer: D

Extreme Networks   EW0-300   EW0-300 braindump   EW0-300

NO.10 What is the RP-set?
A. It is the information of which RP are available for what Multicast groups.
It is send by the BSR towards all PIM routers
B. It is the information of which multicast groups are active
It is send by the RP towards all PIM routers
C. It is the information of which BSR are available for what Multicast groups.
It is send by RP towards all PIM routers
D. It is the information, stored by all RP, needed to find the BSR,
Answer: A

Extreme Networks study guide   EW0-300 test questions   EW0-300   EW0-300 original questions   EW0-300

NO.11 What is the CLI command you would use to configure a VLAN to be protected by
ESRP?
A. enable esrp vlan <vlan>
B. enable esrp vlan <vlan> detail
C. config esrp vlan <vlan>
D. config esrp vlan <vlan> detail
Answer: A

Extreme Networks test   EW0-300   EW0-300   EW0-300   EW0-300 answers real questions   EW0-300 pdf

NO.12 When limit-learning is configured on a port and the limit is reached the following
traffic still flows to the port.
A. Packets destined for the active Mac addresses
B. Broadcast traffic
C. EDP traffic
D. All of the above
Answer: D

Extreme Networks certification training   EW0-300 certification training   EW0-300 exam simulations   EW0-300

NO.13 ESRP-enabled switches can utilize either an IP address or an IPX net ID for their
protected VLANs.
A. TRUE
B. FALSE
Answer: A

Extreme Networks exam dumps   EW0-300   EW0-300 exam dumps   EW0-300

NO.14 Which CLI command configures DVMRP on all IP multicast interfaces.
A. config dvmrp add vlan all
B. config dvmrp add all
C. enable dvmrp
D. enable dvmrp vlan all
Answer: A

Extreme Networks   EW0-300   EW0-300 exam

NO.15 An LSP is a link state packet used by which routing protocol?
A. OSPF
B. RIP
C. BGP
D. None of these
Answer: D

Extreme Networks   EW0-300 dumps   EW0-300 certification   EW0-300 answers real questions

NO.16 OSPF requires that all areas attach directly to the backbone area, and that all
attachments are made with a direct physical connection.
A. True
B. False
Answer: B

Extreme Networks answers real questions   EW0-300 test answers   EW0-300   EW0-300

NO.17 On a RADIUS server you can distinguish between switch access and Netlogin
authentication. Extreme provides a vendor specific attribute
Extreme:Extreme-Netlogin-only =disabled/enabled.
User authentication for both Netlogin and switch access is allowed when the value is
disabled.
When the value enabled user authentication is restricted to Netlogin only.
A. True
B. False
Answer: A

Extreme Networks braindump   EW0-300 original questions   EW0-300 practice test

NO.18 On an Extreme Networks switch, how many bits comprise an OSPF area ID?
A. 32 BITS
B. 48 BITS
C. 64 BITS
D. 128 BITS
Answer: A

Extreme Networks   EW0-300 braindump   EW0-300 exam simulations   EW0-300

NO.19 According
to accompanying diagram and ACL configuration it is possible to telnet
from host A to any of the switch IP addresses.
A. True
B. False
Answer: B

Extreme Networks certification training   EW0-300 original questions   EW0-300 certification   EW0-300   EW0-300   EW0-300 questions

NO.20 It is possible to set an STP-threshold to switch from a shared tree to a shortest path
tree. This switch over will be initiated by:
A. The Rendezvous Point
B. The Bootstrap Router
C. A last hop router
D. The router nearest to the source
Answer: C

Extreme Networks test answers   EW0-300 pdf   EW0-300   EW0-300 answers real questions

NO.21 How does an IGMP router learns about the existence of hosts in multicast groups:
A. By receiving a response on an IGMP membership query
B. By looking into the ARP cache
C. There is no dynamic learning process, instead static FDB entries are used
D. None of the above
Answer: A

Extreme Networks exam dumps   EW0-300   EW0-300   EW0-300

NO.22 EAPS protection switching is similar to what can be achieved with the Spanning
Tree Protocol but one of the big advantages of EAPS is:
A. EAPS also supports star topologies
B. EAPS has a recovery time of less than a second in case of link failure.
C. An EAPS domain supports multiple root bridges, thus alternative path
D. EAPS eliminates the need for protocols like ESRP or VRRP that bring default
gateway redundancy.
Answer: B

Extreme Networks questions   EW0-300   EW0-300   EW0-300

NO.23 Extreme Networks IS? Chipset switches allows you to run simultaneously the
Radius and Tacacs+features.
A. True
B. False
Answer: B

Extreme Networks   EW0-300 exam dumps   EW0-300 test

NO.24 An Ethernet Automatic Protection Switching (EAPS) domain relies on a control
VLAN.
The ports in that control VLAN ports must be tagged, and participating in the ring
only.
A. True
B. False
Answer: A

Extreme Networks   EW0-300   EW0-300 demo

NO.25 In Extreme Ware, which one of the following is an optional ESRP configuration
that allows you to connect active hosts directly to an ESRP master or standby
switch.
A. ESRP Groups
B. ESRP Domain
C. ESRP Host Attach
D. None of these
Answer: C

Extreme Networks   EW0-300 test questions   EW0-300   EW0-300   EW0-300

NO.26 How many bits in the IP TOS field does a Summit 48i examine?
A. 4
B. 6
C. 8
D. 16
Answer: B

Extreme Networks   EW0-300   EW0-300   EW0-300 questions

NO.27 In PIM sparse mode the Bootstrap Router election is based on the highest IP
address.
A. True
B. False
Answer: B

Extreme Networks certification   EW0-300 study guide   EW0-300   EW0-300 answers real questions   EW0-300 exam prep

NO.28 The integrated IS-IS protocol allows for mixing of IP-only,OSI-only, and dual (IP
and OSI) routers.
A. True
B. False
Answer: A

Extreme Networks   EW0-300 original questions   EW0-300   EW0-300

NO.29 An IP-only IS-IS router (or "IP-only" router) is defined to be
A. A router which uses IS-IS as the routing protocol for IP
B. Does not otherwise support OSI protocols
C. One of the IS-IS router types
D. All of the above
Answer: D

Extreme Networks certification   EW0-300 certification   EW0-300   EW0-300 practice test   EW0-300   EW0-300

NO.30 In OSPF, the router type that is required to connect an area with another area is
the:
A. Designated Router
B. Back-up Designated Router
C. ASBR
D. ABR
Answer: D

Extreme Networks braindump   EW0-300 original questions   EW0-300 test answers   EW0-300 exam   EW0-300 test   EW0-300

Pass4Test is a website to meet the needs of many customers. Some people who used our simulation test software to pass the IT certification exam to become a Pass4Tes t repeat customers. Pass4Test can provide the leading Extreme Networks training techniques to help you pass Extreme Networks certification EW0-300 exam.