Free download Juniper certification JN0-360 exam practice questions and answers

Before you decide to buy Pass4Test of Juniper JN0-360 exam questions, you will have a free part of the questions and answers as a trial. So that you will know the quality of the Pass4Test of Juniper JN0-360 exam training materials. The Juniper JN0-360 exam of Pass4Test is the best choice for you.

According to the research of the past exams and answers, Pass4Test provide you the latest Juniper JN0-360 exercises and answers, which have have a very close similarity with real exam. Pass4Test can promise that you can 100% pass your first time to attend Juniper certification JN0-360 exam.

Exam Code: JN0-360

Exam Name: Juniper (Juniper Networks Certified Internet Specialist (JNCIS-SP))

The exam questions and answers of general Juniper certification exams are produced by the IT specialist professional experience. Pass4Test just have these IT experts to provide you with practice questions and answers of the exam to help you pass the exam successfully. Our Pass4Test's practice questions and answers have 100% accuracy. Purchasing products of Pass4Test you can easily obtain Juniper certification and so that you will have a very great improvement in IT area.

All the IT professionals are familiar with the Juniper JN0-360 exam. And all of you dream of owning the most demanding certification. So that you can get the career you want, and can achieve your dreams. With Pass4Test's Juniper JN0-360 exam training materials, you can get what you want.

In this age of advanced network, there are many ways to prepare Juniper JN0-360 certification exam. Pass4Test provides the most reliable training questions and answers to help you pass Juniper JN0-360 certification exam. . Pass4Test have a variety of Juniper certification exam questions, we will meet you all about IT certification.

JN0-360 Free Demo Download: http://www.pass4test.com/JN0-360.html

NO.1 You have been asked to configure an IPv6 address for a group of interfaces that could belong on
different routers. If a packet is sent to that address, it should be received by all routers in the group.
Which address type would be suited for these requirements?
A.Unicast
B.Multicast
C.Anycast
D.Broadcast
Answer: B

Juniper   JN0-360   JN0-360 practice test   JN0-360

NO.2 What are two valid actions that can be applied to a frame by a Layer 2 firewall filter?
(Choose two)
A.Log
B.loss-priority
C.sample
D.count
Answer: BD

Juniper test questions   JN0-360   JN0-360 exam

NO.3 You must configure an OSPF area that does not accept type 3 link-state advertisements (LSAs) from
area 0 (other than the default route) You have configured your area to be stub, but you still see type 3
LSAs.
What will account for this behavior?
A.You should have configured your area as totally stubby
B.You should have used a not-so-stubby-area
C.You are experiencing a routing loop
D.You have exported routes into OSPF
Answer: A

Juniper braindump   JN0-360 exam simulations   JN0-360   JN0-360 certification

NO.4 Router A is an OSPF router connected to both Area 0 and Area 1 Area 1 has been configured as a stub
area Which two LSA types does Router A suppress from Area 1 ?
A.Router LSA
B.External LSA
C.Summary LSA
D.ASBR Summary LSA
Answer: B D

Juniper   JN0-360 test answers   JN0-360 answers real questions

NO.5 Click the Exhibit button
Based on the illustration of the VPLS topology shown in the exhibit, which statement is true?
A.PE-C must have a spanning-tree protocol enabled
B.CE-C must have BGP enabled
C.Traffic forwarded from PE-C to PE-A is forwarded on to PE-B
D.Traffic forwarded from PE-C to PE-A is not forwarded on to PE-B
Answer: D

Juniper   JN0-360 exam simulations   JN0-360

NO.6 Which BGP state denotes a fully operational session?
A.Established
B.Active
C.Operational
D.Connect
Answer: A

Juniper certification training   JN0-360   JN0-360 original questions   JN0-360 exam   JN0-360

NO.7 What is the function of the hop limit field in the IPv6 header?
A.It limits the diameter of the network to 20 hops
B.It sets the number of hops in the network to be equal to the MPLS header time-to-live (TTL)
C.It replaces the time-to-live (TTL) field in IPv4
D.It represents future extensibility to the protocol
Answer: C

Juniper exam prep   JN0-360   JN0-360   JN0-360   JN0-360

NO.8 Which two values displayed in the output from the show spanning-tree MSTP configuration command
must match on all switches participating in the same MSTP region? (Choose two)
A.root bridge identifier
B.authentication checksum
C.context identifier
D.configuration digest
Answer: CD

Juniper   JN0-360   JN0-360   JN0-360 test answers   JN0-360 dumps

NO.9 You have recently implemented a graceful Routing-Engine switchover (GRES) and want to further
reduce down time if a Routing Engine (RE) failure occurs.
Which two features can be configured on this device to reduce its downtime in this situation? (Choose
two)
A.VRRP
B.GR
C.BFD
D.NSR
Answer: B D

Juniper practice test   JN0-360   JN0-360 exam   JN0-360

NO.10 Click the Exhibit button
In the exhibit, OSPF routers R1, R2, R3, and R4 come up, in order, at 1-minute intervals
Which router will be the designated router?.
A.R1
B.R2
C.R3
D.R4
Answer: A

Juniper   JN0-360   JN0-360 braindump   JN0-360 test answers   JN0-360

NO.11 Which Junos operational mode command is used to verify that load balancing is working as expected?
A.show route all
B.show route extensive
C.show route balancing
D.show route forwarding-table
Answer: D

Juniper practice test   JN0-360   JN0-360   JN0-360 original questions   JN0-360   JN0-360 exam dumps

NO.12 You are logged into a router and have navigated to the (edit routing-options] level of the hierarchy. You
have been asked to create a static route that will use 10.10.10.1 as its primary next-hop and 10.10.10.5
as its secondary next-hop.
Which command correctly configures this scenario?
A.set static route 8/8 10.10.10.1 qualified-next-hop 10.10.10.5 pref 10
B.set static route 8/8 next-hop 10.10.10.1 secondary-next-hop 10.10.10.5 preference 10
C.set static route 8/8 next-hop 10.10.10.1 qualified-next-hop 10.10.10.5 preference 10
D.set static route 8/8 next-hop [10.10.10.1 10.10.10.5] pref 10
Answer: C

Juniper braindump   JN0-360   JN0-360 braindump

NO.13 Click the Exhibit button
You work for the regional Internet service provider shown in the exhibit You have a partial BGP table and
are receiving a 10 100/16 route from your upstream ISP You have been asked to configure a default route
that can be sent to your downstream customer This route should forward customer traffic toward your
upstream Tier 11SP as long as the 10.100/16 route is present.
What would accomplish this goal?
A.Create and announce an aggregate default route
B.Create and announce a static default route with a next-hop of discard
C.Create and announce a static default route with a next-hop of reject
D.Create and announce a generated default route
E.Create an advertise-map with exist-map
Answer: E

Juniper exam   JN0-360 certification training   JN0-360 questions   JN0-360 certification   JN0-360 questions

NO.14 Which two statements describe differences between IPv4 and IPv6.? (Choose two)
A.IPsec is built into IPv6
B.IPv6 uses a 32-bit (4-byte) address and can support up to 4,294,967,296 addresses
C.IPv4 supports extension headers whereas IPv6 options are integrated into the base
D.IPv6 eliminates the need for NAT
Answer: AD

Juniper dumps   JN0-360 practice test   JN0-360

NO.15 You have configured an IP-IP tunnel between Router A and Router B
Which Junos operational mode command is used to verify that the tunnel interface is up and operational?
A.show chassis tunnel status
B.show tunnel interface
C.show interfaces terse
D.show interfaces tunnel
Answer: C

Juniper   JN0-360 test answers   JN0-360   JN0-360 certification   JN0-360   JN0-360

NO.16 Which role does the router ID (RID) have in the BGP route selection process?
A.The router ID is evaluated immediately after MED to determine route preference
B.The router ID is evaluated last in the route selection process
C.The router ID is evaluated after the cluster length and a lower router ID is chosen
D.The router ID is evaluated after analyzing the IGP metric cost
Answer: C

Juniper   JN0-360 test questions   JN0-360

NO.17 Which IS-IS packet is used to determine the level of an IS-IS neighbor?
A.IIH
B.LSP
C.PSNP
D.CSNP
Answer: A

Juniper   JN0-360 exam prep   JN0-360 test questions   JN0-360   JN0-360 test questions

NO.18 You are logged into a router and have navigated to the [edit routing-options] level of the hierarchy. You
have been asked to create a static route that will use 43 18 7 1 as its primary next-hop and 76 1310 2 as
its secondary next-hop.
Which command correctly configures this setup?
A.set static route 0/0 76.13.10.2 qualified-next-hop 43.18.7.1 pref 10
B.set static route 0/0 next-hop 43.18.7.1 secondary-next-hop 76.13.10.2 preference 10
C.set static route 0/0 next-hop [76.13.10.2 10.10.10.5] pref 10
D.set static route 0/0 next-hop 43.18.7.1 qualified-next-hop 76.13.10.2 preference 10
Answer: D

Juniper exam simulations   JN0-360   JN0-360   JN0-360 certification training   JN0-360

NO.19 Click the Exhibit button
Referring to the network illustrated in the exhibit, how does router A reach destinations in area 49.2222?
A.Router A will use the routes from area 49.2222; it learns from router B
B.Router A will see the attached bit from router B and create a default route
C.Router A must have a default route manually configured
D.Router A will receive a default route in the IS-IS update from router B
Answer: B

Juniper questions   JN0-360 pdf   JN0-360 dumps

NO.20 You have been asked to define a default gateway for traffic leaving a router. This route should use
interface so-0/0/0 as its next-hop.Which type of route would be suited for this scenario?
A.a static route
B.a generated route
C.a martian route
D.an aggregate route
Answer: A

Juniper   JN0-360   JN0-360   JN0-360   JN0-360

Are you still worrying about how to safely pass Juniper certification JN0-360 exams? Do you have thought to select a specific training? Choosing a good training can effectively help you quickly consolidate a lot of IT knowledge, so you can be well ready for Juniper certification JN0-360 exam. Pass4Test's expert team used their experience and knowledge unremitting efforts to do research of the previous years exam, and finally have developed the best pertinence training program about Juniper certification JN0-360 exam. Our training program can effectively help you have a good preparation for Juniper certification JN0-360 exam. Pass4Test's training program will be your best choice.